Datasheet
DPE-302GE 2-Port Gigabit PoE Extender
D-Link European Headquarters. D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2017 D-Link Corporation. All rights reserved. E&OE.
Updated September 2017
For more information: www.dlink.com
Technical Specications
Ports
PoE + Data Ports (IN) • 1 x 10/100/1000BASE-T RJ45 port • Supports half/full-duplex
PoE + Data Ports (OUT) • 2 x 10/100/1000BASE-T RJ45 port • Supports half/full-duplex
Standards • IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3x Flow Control
Physical
Indicator LEDs (Per Unit) • 1 x PoE In
• 2 x PoE Out
• Solid blue: PoE connected
• Blinking blue: PoE budget overload
Dimensions (L x W x H) • 155 x 60 x 40 mm
Weight • 154 g
Power • Power over Ethernet
Power Consumption • Maximum: 3.05 W • Standby: 1.61 W
Temperature • Operating: -10 to 60 °C • Storage: -40 to 85 °C
Humidity • Operating: 10% to 95% non-condensing • Storage: 5% to 95% non-condensing
Certifications • CE
• FCC
• LVD/CE
• IC
1
Up to 500 m extension requires 802.11at PSE source. Maximum distance as per IEEE 802.3u specications. Distances exceeding 100 m can be reached by linking additional DPE-302GE units.
2
Loss of PoE power occurs over longer distances due to cable resistances. The actual power output will vary based on the quality of the used Ethernet cables and environmental factors.
DPE-302GE Interface Ports
PoE and Gigabit data input port PoE and Gigabit data output ports