User`s manual

DP-G310 User’s Manual

D-Link Systems, Inc.

Conﬁguration > Wireless (continued)

WEP Encryption

This ﬁeld allows you to conﬁgure the settings of data encryption. Please remember that the WEP key must be set

before the data encryption is enforced.

WEP Encryption: This option allows you to select Disable, 64-bit, or 128-bit for encryption setting.

WEP Key Format: You can decide the network key to be encoded by ASCII (ASCII characters) or HEX

(hexadecimal). 64-bit WEP encryption uses a 10 hexadecimal character key. The WEP encryption key must

match the WEP settings on your AP or wireless router to connect properly.

Then, enter the key(s) for the network in the Key box (1-4).

WPA-PSK: This option allows you to use a WPA-PSK passphrase.

Preshared Key: Enter the WPA-PSK passphrase or key used on your network.

Advanced Setting

Beacon Interval: Enter the number for the beacon interval in milliseconds.

Preamble: This option allows you to set the length of the preamble. Setting options are:

 Long: set to 144 bits

 Short: set to 72 bits.

Authentication Type: You can set the authentication type by selecting the settings: Open System, Shared Key,

and Both.

Using the Web Conﬁguration (continued)

Using the Web Conﬁguration