User`s guide

10
Unpacking and Installation
443 PP
7
8
2
49
LQ
:3 PP
5
6
2
7
LQ
When setting the screws into the wall or partition, leave about 3 mm (
1
/
8
in)
between the head of each screw and the wall surface. Then place the DP-
300 so that the mounting sockets on the bottom of its case fit over the two
screws. Press the case gently toward the wall and slide the case at a 45
°
angle downward and leftward to engage the screwheads in the slots of the
mounting sockets.