User`s guide

4
Introduction
Network Cable Connector
The DP-300’s right side panel features an RJ-45 connector for connection to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which
should be Category 5 twisted-pair cable). The port supports the NWay
protocol, allowing the print server to automatically detect or negotiate the
transmission speed of the network.
DC Power Connector
The DC power input connector is located on the DP-300’s right side panel
and is labeled DC 12V.
Figure 1 -3 Print Server Right Side Panel
LED Indicators
The front panel of the DP-300 features five LED indicators:
Figure 1 -4 Front Panel LED Indicators
♦ Power/Tx