User manual

52D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Live Video
Setup Live View
Step 1: Click the LIVE VIDEO button at the top of the menu.
Step 2: Select a camera(s) from the camera list on the right and then drag it to the location to where you wish the
image to be displayed.
Step 3: Users can change the video display position by drag it to another position.
Note
1.Theselectedvideowillbemarkedwithagreenline.
2.RightclickingonthevideowillshowtheoptiontoToggle to Full Screen.PresstheESCbuttononthekeyboardtoreturntonormaldisplay.
3. If the camera supports audio, users can check Enable Audio from the right click menu and listen to live audio of this channel.
4.IfthecamerasupportsPTZ,userscancontroltheselectedcamerafromthePTZpanel.UserscanalsorightclickonthevideoandcheckEnable Move to
controlthePTZfunctiondirectly.PleasenotethatwhenEnable Move is checked, the video will be marked with a red outline. This indicates that another
cameracannotbeadjusteduntilthePTZfunctionhasbeendeactivated.
This section will enable you to congure and view the live video from your network cameras.