User manual

45D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
All the configurations can be saved as a
le to the specied location. Click the Save
Conguration button to save the le.
User can restore the conguration le after reset
to factory default le.
Click the Browse button to select the
conguration le and restore it by clicking the
Restore Conguration from File button.
If the NVR is malfunctioning or crashes
unexpectedly, click the Restart button on the
NVR. Restarting the NVR will take about one
and a half minutes.
This will reset all configurations to factory
default. User can select to preserve the IP or
DDNS, thus the remote connection will remain
after reset.
Backup and Restore
Save
Configuration:
Load
Configuration
File:
Restart:
Reset to
Default:
Users can save the NVR conguration to a le and restore it when necessary. Ocassionally, restarting the NVR can
keep the system running smoothly. Reset the NVR to restore all congurations to factory default.