User manual

37D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Event Setup (DNS-726-4 Only)
Connection lost:
Motion Detected:
Input:
Action is triggered if the connection between the
camera and NVR is lost.
All motions from camera will trigger the action.
External input will trigger the action.
Step 1: Choose the camera, and then select one of the three events.
Output:
E-mail:
If the event occurs, the system will send a signal to
other connected devices.
If the event occurs, the system will send an E-mail
to the pre-set contacts.
Step 2: Click the Add button to setup the actions of the
event.
Step 3: Click the action, and then click the Congure button to modify the details of that action if necessary.
Step 4: Repeat step 2 through 3 to add more actions.
Step 5: Repeat step 1 through 3 to set more cameras.
Note:
• Inaddition,youcanalsosettheeventnoticationforwhentheharddiskisfull.
• Thescreenwilldisplaytheeventinformationafteryouhaveconguredthesettings.
Note
Before setting the event Motion from Camera, you must first configure
the motion detection function on your camera
This option may be congured and applied using DNS-726-4.