User manual

30D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Camera Search
Step 1: Click the Search button to search for UPnP
cameras. The system will list all the available cameras
at this moment. Click the “+” icon to add this camera into
your camera list.
Step 2: After clicking the icon, the camera setting page
will pop-up. Click on the camera that you want to add.
Step 3: Enter the camera name, user name, and
password of the camera.
Note
• Somecameraswilllimittheloginauthoritytotheadministratoronly.
• ToaddcameraswithouttheUPnPfunction,pleasegototheCamera
SetupmenuandentertheIPaddressmanually.
• Youmaynotbeabletoseeallthecamerasonyourrstsearch.Itmay
takeamomentforthedevicestorespondtotheUPnPrequest.Please
click Search again if cameras are not immediately displayed.
Step 4: Click the Add button to add the selected
camera.
Step 5: After clicking Add, the updated information will
be displayed in the Camera List.
Step 6: Repeat step 2 through 5 to add other cameras
into your list.