User manual

18D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
NVR Search Utility
Network Video
Recorder:
Refresh:
Configuration:
LAN:
Apply:
System Info:
When the NVR is rst powered on, during the initial boot sequence, it will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32.
It is recommended to use the included D-Link NVR Search Utility when accessing and conguring the NVR for the
rst time. If you would like to change the IP address before logging in or if you are unable to connect to the NVR IP
address, you can use the NVR Search Utility provided on the product CD to locate the device on your network and
make any necessary changes.
The NVR Search Utility displays the
available NVR devices on the network.
Refresh the device list.
Click the Configuration button to open
a web browser for viewing, playback and
conguration. Double-clicking on the name
or IP of an NVR will also open a web
browser.
Congure the LAN Settings for the NVR
here.
Click Apply to save and activate changes
to the LAN Settings.
The system information for the selected
NVR is displayed here.