User Manual

61D-Link DNR-202L User Manual
Appendix A - LED and Buzzer Denition
LED and Buzzer Overview
LED Color Status Description
Power & Network LED Red O Power down / Link Up
On Power on
Blinking Firmware update
Blue
(Network)
O Network failure
On Network Link Connected
Blinking Trac
USB1 LED Green O HDD1 disabled
On HDD1 enabled
Blinking Read / Write HDD1
USB2 LED Green O HDD2 disabled
On HDD2 enabled
Blinking Read / Write HDD2
Key Trigger Method Description
USB1 button Press button for 3 seconds Un-mount HDD1, Buzzer will beep (long).
USB1 LED o.
USB2 button Press key2 for 3 seconds button Un-mount HDD2, Buzzer will beep (long).
USB2 LED o.
Auto scan button Auto scan function- Press scan button for 3 seconds Start auto scan IP Cameras in local network.
Buzzer will beep (long).
Camera Echo function- Press scan button for 0.5 second Echo IP Camera found (1 beep for 1st camera
found, 2
 beeps for 2nd, 3 beeps for 3rd, 4 beeps
for 4th).
Buzzer will beep (short).
Reset button Press reset pin for 10 seconds Reset to factory default.
Buzzer will beep (long).