User Manual
47D-Link DNR-202L User Manual
Section 5 - Conguration
Audio and Video
Step 1: Select the camera which you would like to modify from the camera list.
Step 2: NVR will display the parameters for the selected camera. You can modify
the parameters for a main and sub prole on this page.
Camera Name:
Video Format:
Frame rate:
Resolution:
Bit rate:
Quality:
Audio:
Go to Web:
The name of the camera.
Select the video format the camera supports.
Select the frame rate.
Select the resolution.
Select the bit rate.
Select the image quality.
Check the Enable Audio option for live view and recording
Click to connect to the web page of the selected network camera
for advanced setup. For example, motion detection should be
congured via the camera web interface to enable the NVR to receive
the trigger message.
Step 3: Click the Save Settings button.
Note: The system will adjust the frame rate automatically based on the maximum frame rate
which that camera can support.
This section will allow you to congure and modify the audio and video parameters for each camera.