User Manual

32D-Link DNR-202L User Manual
Section 5 - Conguration
Conguration
Using the Conguration Interface
After completing the Setup Wizard, you are ready to use your NVR. The NVR's built-in web conguration utility is designed to
allow you to easily access and congure your DNR-202L. At the end of the wizard, click Go to NVR, or enter the IP address of
your NVR into a web browser, such as Internet Explorer. To log in, use the username admin and the password you created in
the Setup Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Step 2
Enter your NVR credentials to access the conguration interface.
Step 1
Click Go to NVR to continue to the NVR web conguration page.