Installation Manual

D-Link DNR-202L mydlink Camera Video Recorder

• Computer with Microsoft Windows

7 or 8, Windows Vista

2 or XP SP 2;

Mac OS 10.5 or above

• PC with Pentium 4 – 2.4 GHz or above; at least 512MB RAM

• Internet Explorer 7 or above, Firefox, Chrome, or Safari 4 or above

• Existing 10/100 Ethernet-based network

Installation - Windows Only

Step 1:

Connect the included Ethernet cable to the Ethernet port located on the rear

panel of the DNR-202L and attach it to your network.

Step 2:

Connect the power supply to the power connector located on the rear panel of

the DNR-202L and connect it to a wall outlet or power strip. Power is conrmed

when the blue LED Power Indicator located on the front panel is lit.

Step 3:

Open your web browser and go to http://www.mydlink.com/support. Then,

click the Storage tab and select your product to download the Setup Wizard.

Step 4:

Click the Start button to start the wizard and follow the instructions to set up

your NVR. If you want to add cameras to your previously-congured DNR-202L,

click the Skip button.

Note: Ensure that cameras have been installed on the network before initiating the

DNR-202L setup.

ENGLISH