Specifications

ABOUT THIS GUIDE

This manual shows you how to configuring your DMC-1002 SNMP Module

for Chassis-Based Media Converter.

Features

9 Compliant with IEEE802.3u 100BASE-TX standards

9 Enable to monitor the module through terminal emulation program and

Web browser

9 The network administrator can access management software by

connecting the management module either to a terminal emulation

program (through the RS232 interface) or to a remote network

management station (through the RJ45 interface and a hub)

9 Status indication include:

1. Identification of: Media Converter type; Slot number occupied

2. Status Indication of Chassis: Redundant Power status; Power Fail status;

Fan Fail status

3. Status Indication of Modules: Unit Power; Link/Activity; Transmit; Receive

LED Indication: Power/Power Fail/Fan Fail/MGM/Console/Link/ACT

9 Support Hot-swappable

9 Auto-negotiation for half-duplex/full-duplex on TX ports

9 Equipped with a 19” system chassis 16-converter with Redundant Power

supply for optional Expansion use.

Unpacking

Open the shipping carton of the SNMP Module and carefully unpack its

contents. The carton should contain the following items:

One DMC-1002 SNMP Module for Chassis-Based Media Converter

One RS232 cable

This Manual

If any item is found missing or damaged, please contact your local reseller for replacement.