Installation guide

41
Figure 5-17. KVM Vision Viewer Setup step
6.2.3.2 Create a New Device
 Start KVM Vision Viewer
 Click on “Device” and select “New Device” to create a new devi ce
Figure 5-17. Create a new Device
DKVM-IP8
192.168.0.70
admin
Figure 5-17. Device Configuration dialog
Device Name: Enter a name to your de vice.
Network Address: Enter an IP address the DKVM-IP8 switch uses. Authentication Port: This is a
fixed number “443”.
Username: The factory default Username is “admin” Password: The factory defau lt Password is