User manual

1
Quick Installation Guide
DKVM-4U
4-PORT USB KVM SWITCH
Check Your Package Contents
DKVM-4U USB KVM Switch Quick Installation Guide 2 sets 2 in 1 USB KVM Cable
in 6ft
Installing the DKVM-4U
The following steps below apply to each computer that you are using with your DKVM-4U.
Installation of the DKVM-4U is now complete.
A. Attach your
computer’s
USB keyboard
connector to
the DKVM-4U
USB keyboard
port.
B. Attach your
computer’s
USB mouse
connector to
the DKVM-4U
USB mouse
port.
C. Attach your
monitor’s HDDB
15 VGA
connector to the
VGA port of the
DKVM-4U.
D. Using the
included KVM
cable, attach
the USB B type
connector to
the DKVM-4U.
E. Using the
included KVM
cable, attach the
VGA connector
to the VGA port
of the DKVM-4U.
F.
Using the connectors on
the other end of the
included KVM cables that
you connected to the
DKVM-4U in the previous
section, attach the VGA
connector to the VGA port
located on the back of
your computer case.
G. Attach the USB A
type connector to an
available USB port
located on the back
of your computer
case.
The DKVM-4U is a hot-swappable KVM switch. You do not need to turn your
computers off before installing the Device.