User`s guide

-
26
-
computer. Rebooting is necessary when trying this.
If the computer still does not detect the mouse, then
your computer’s PS/2 mouse port has a problem.
Q: The computer boot up fine, but the mouse does not
work.
A: ?Check the cables and make sure they are inserted
properly in the correct ports.
?Make sure the mouse works when plugged into the
computer. Rebooting is necessary when trying this.
If the mouse pointer still does not move, then either
your PS/2 mouse port or the mouse itself has a
problem.
?Try a different mouse.
?Make sure the mouse is a true PS/2 mouse. A combo
mouse will work just a s long as it is set for PS/2
mode with the correct adapter. A serial-only mouse
with a combo mouse adapter WILL NOT work.
?Check to make sure that the power adapter is plugged
in and is working properly. Make sure the power
switch is on.
Q: When I switch from one port to another, mouse
movement is completely erratic. What do I do?
A : Switch the console port to the problem PC port and
power on this PC again to get the mouse.