User`s guide

-
19
-
default of 8 port KVM switch PC name is from “SYSTEM
01”, “SYSTEM 02”,…, “SYSTEM 08”.
w The sun symbol “¤ “ beside the PC name shows that
the respective PC system is powered on.
x T
he “OSD: 10 SEC” means that the OSD windows
display or PC system name exists 10 sec. on your monitor.
You can modify it from 05 sec to 99 sec. The factory
default value is 10 sec.
y
“SCAN TIME” is the scan interval from one PC port
hopped to the next PC p
ort. The default SCAN time is 10
sec and the maximum scan time is 99 sec.
z
“CHANGE PASSWORD” allows the user to change the
password used to access all PC systems connected. The
default password is 8 digits “ 00000000 “.
There is an enter password
window showed out when you
select this item and then press the Enter. The maximum
password is eight digits. After you key in the password and
press the Enter key, there is another window for confirming
your typed password.
ENTER PASSWORD :
¦
ESC: QUIT
ENTER :