User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
91
Port Security Port Settings
This window is used to view and configure the port security port settings.
To view the following window, click Security > Port Security > Port Security Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter Description
From Port / To Port Select the appropriate port range used for the configuration here.
State Select to enable or disable the port security feature on the port(s)
specified.
Maximum Enter the maximum number of secure MAC addresses that will be
allowed on the port(s) specified. This value must be between 1 and
64. By default, this value is 32.
Violation Action Select the violation action that will be taken here. Options to
choose from are Protect, Restrict, and Shutdown. Selecting
Protect specifies to drop all packets from the insecure hosts at the
port- security process level, but does not increment the security-
violation count. Selecting Restrict specifies to drop all packets
from the insecure hosts at the port-security process level and
increments the security-violation count and record the system log.
Selecting Shutdown specifies to shut down the port if there is a
security violation and record the system log.
Aging Time Enter the aging time value used for auto-learned dynamic secured
addresses on the specified port here. This value must be between
0 and 1440 minutes.
Click the Apply button to accept the changes made.
Figure 8-2 Port Security Port Settings window