User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
88
Click the Apply button to accept the changes made.
The fields that can be configured in Port Default CoS are described below:
Parameter Description
From Port / To Port Select the appropriate port range used for the configuration here.
Default CoS Select the default CoS option for the port(s) specified here.
Options to choose from are Low, Medium, High, and Highest.
Click the Apply button to accept the changes made.
Port Rate Limiting
This window is used to view and configure the port scheduler method settings.
To view the following window, click QoS > Port Rate Limiting, as shown below:
The fields that can be configured are described below:
Parameter Description
From Port / To Port
Select the appropriate port range used for the configuration here.
Direction
Select the direction option here. Only support Input. When Input is
selected, the rate limit for ingress packets is configured.
Rate Limit
Enter the input bandwidth value used in the space provided. This
value must be between 100 and 1048576 kbps.
Click the Apply button to accept the changes made.
Figure 7-2 Port Rate Limiting window