User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
85
MLD Snooping Groups Settings
This window is used to configure and view the MLD snooping static group, and view MLD snooping
group.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Groups Settings, as shown below:
The fields that can be configured for MLD Snooping Static Groups Settings are described below:
Parameter Description
VID
Enter a VLAN ID of the multicast group.
Group Address
Enter an IPv6 multicast group address.
From Port / To Port
Select the appropriate port range used for the configuration here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast Filtering
This window is used to view and configure the Layer 2 multicast filtering settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown
below:
The fields that can be configured are described below:
Parameter Description
Multicast Filter Mode
Select the multicast filter mode here. Options to choose from are
Forward Unregistered and Filter Unregistered. When selecting the
Forward Unregistered option, registered multicast packets will be
forwarded based on the forwarding table and all unregistered
multicast packets will be flooded based on the VLAN domain.
When selecting the Filter Unregistered option, registered packets
will be forwarded based on the forwarding table and all
unregistered multicast packets will be filtered.
Click the Apply button to accept the changes made.
Figure 6-54 MLD Snooping Group Settings window
Figure 6-55 Multicast Filtering window