User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
84
MLD Snooping Settings
This window is used to configure the MLD snooping settings.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Settings, as shown below:
The field that can be configured for Global Settings is described below:
Parameter Description
Global State
Select this option to enable or disable MLD snooping global state.
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Status Settings are described below:
Parameter Description
VID
Enter a VLAN ID from 1 to 4094, and select to enable or disable
MLD snooping on the VLAN.
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Querier Status Settings are described below:
Parameter
Description
VID Enter a VLAN ID from 1 to 4094, and select to enable or disable
MLD snooping querier on the VLAN.
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Fast Leave Settings are described below:
Parameter Description
VID
Enter a VLAN ID from 1 to 4094, and select to enable or disable
MLD snooping fast leave on the VLAN.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-53 MLD Snooping Settings window