User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
75
ERP instance should be identical. Select the Specify radio button
to configure this parameter as per normal. Select the None radio
button to revert this parameter to the default setting.
Profile Name
Select the checkbox and enter the G.8032 profile’s name here that
will be associated with this ERP instance. Multiple ERP instances
can be associated with the same G.8032 profile. The instances
associated with the same profile protect the same set of VLANs, or
the VLANs protected by one instance are a subset of LANs
protected by another instance. This name can be up to 32
characters long. Select the Specify radio button to configure this
parameter as per normal. Select the None radio button to revert
this parameter to the default setting.
RPL Port
Select the checkbox and then select the RPL port option here.
Options to choose from are Port0 and Port1. The option selected
will be configured as the RPL port.
RPL Role
Select the checkbox and then select whether this node is the RPL
owner or neighbor. Options to choose from are Owner and
Neighbor. Enabling this option will specify this RPL as an owner.
Activate
Select the checkbox and then select whether or not to active this
ERP instance. Options to choose from are Enabled and Disabled.
Enabling this option will active this ERP instance.
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After click the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.
ERPS Profile
This window is used to view and configure the Ethernet Ring G.8032 profile settings.
To view the following window, click L2 Features > ERPS (G.8032) > ERPS Profile, as shown below:
Figure 6-44 ERPS (View Status) window