User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
69
STP Global Settings
This window is used to view and configure the STP global settings.
To view the following window, click L2 Features > Spanning Tree > STP Global Settings, as shown
below:
The field that can be configured for Spanning Tree State is described below:
Parameter Description
Spanning Tree State
Select this option to enable or disable the STP global state here.
Click the Apply button to accept the changes made.
The fields that can be configured for STP Mode are described below:
Parameter Description
STP Mode
Select the STP mode used here. Options to choose from are
MSTP, RSTP, and STP.
Click the Apply button to accept the changes made.
The fields that can be configured for STP Traps are described below:
Parameter Description
STP New Root Trap
Select this option to enable or disable the STP new root trap option
here.
STP Topology Change Trap
Select this option to enable or disable the STP topology change
trap option here.
Click the Apply button to accept the changes made.
The fields that can be configured for Spanning Tree Priority are described below:
Parameter Description
Priority
Select the STP priority value here. This value is between 0 and
61440. By default, this value is 32768. The lower the value, the
higher the priority.
Figure 6-35 STP Global Settings window