User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
61
Log State
Set the Surveillance VLAN log state
Click the Apply button to accept the changes made.
The fields that can be configured for Port Settings are described below:
Parameter Description
From Port / To Port
Select the appropriate port range used for the configuration here.
State
Select this option to enable or disable the state of the port.
Click the Apply button to accept the changes made.
MAC Settings and Surveillance Device
This window is used to configure the user-defined surveillance device OUI and display the surveillance
VLAN information.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings
and Surveillance Device, as shown below:
The fields that can be configured are described below:
Parameter Description
Component Type
Select the surveillance component type. Options to choose from
are Video Management Server, VMS Client/Remote Viewer, Video
Encoder, Network Storage, and Other IP Surveillance Device.
Description
Enter the description for the user-defined OUI with a maximum of
32 characters.
MAC Address
Enter the OUI MAC address.
Mask
Enter the OUI MAC address matching bitmask.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
After clicking the Auto Surveillance VLAN Summary tab, the following page will appear.
Figure 6-23 User -defined MAC Settings window