User Manual

ManualsBrandsD-Link ManualsAutomationD-Link DIS-200G-12PS Network RJ45/SFP switch 12 ports PoE

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

The fields that can be configured are described below:

Parameter Description

VLAN Mode

Select the VLAN mode option here. Options to choose from are

Access, Hybrid, and Trunk.

Acceptable Frame

Select the acceptable frame behavior option here. Options to

choose from are Tagged Only, Untagged Only, and Admit All.

Ingress Checking

Select the check box to enable or disable the ingress checking

function.

Native VLAN

Tick this option to enable the native VLAN function.

VID

After ticking the Native VLAN check box, this option will be

available. Enter the VLAN ID used for this configuration here. This

value must be between 1 and 4094.

Action

Select the action that will be taken here. Options to choose from

are

Add, Remove, Tagged, and Untagged.

Add Mode

Select whether to add an Untagged or Tagged parameters.

Allowed VLAN Range

Enter the allowed VLAN range information here.

Click the Apply button to accept the changes made.

Click the Back button to return to the previous window.

When Trunk was selected as the VLAN Mode, the following page will appear.