User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
53
GVRP
GVRP Global
This window is used to view and configure the GARP VLAN Registration Protocol (GVRP) global settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown below:
The fields that can be configured are described below:
Parameter Description
Asymmetric VLAN State
Select this option to enable or disable the global GVRP state here.
Dynamic VLAN Creation
Select this option to enable or disable the dynamic VLAN creation
function here.
Join Time
Enter the Join Time value in centiseconds. This value must be
between 1 and 20 centiseconds. By default, this value is 20
centiseconds.
Leave Time
Enter the Leave Time value in centiseconds. This value must be
between 60 and 300 centiseconds. By default, this value is 60
centiseconds.
Leave All Time
Enter the Leave All Time value in centiseconds. This value must
be between 1000 and 5000 centiseconds. By default, this value is
1000 centiseconds.
Click the Apply button to accept the changes made.
GVRP Port
This window is used to view and configure the GVRP port settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Port, as shown below:
Figure 6-12 GVRP Global window