User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
45
RMON Event Settings
This window is used to configure and display event entries.
To view the following window, click Management > RMON > RMON Event Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Index
Enter the index of the alarm entry between 1 and 65535.
Description
Enter a description for the RMON event entry. The string is up to
127 characters long.
Type
Select the RMON event entry type. Options to choose from are
None, Log, Trap, and Log and Trap.
Community
Enter the community string. The string can be up to 127
characters.
Owner
Enter the owner string. The string can be up to 127 characters.
Click the Add button to add a new entry based on the information entered. \
Click the Delete button to remove the specified entry.
Click the View Logs button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the View Logs button, the following window will appear.
Click the Back button to return to the previous window.
Figure 5-16 RMON Event Settings
Figure 5-17 Event Logs Table window