User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
43
After clicking the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.
RMON History Settings
This window is used to configure and display RMON MIB history statistics gathering on the specified port.
To view the following window, click Management > RMON > RMON History Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Port
Select to choose the port.
Index
Enter the history group table index. The value is from 1 to 65535.
Bucket Number
Enter Specifies the number of buckets specified for the RMON
collection history group of statistics. The range is from 1 to 65535.
The default value is 50.
Interval
Enter the time in seconds in each polling cycle. The range is from
1 to 3600.
Owner
Enter the owner string. The string can be up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Show Detail button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Figure 5-12 RMON Statistics Table window
Figure 5-13 RMON History Settings window