User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
42
RMON
RMON Global Settings
This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap
feature for the SNMP function on the Switch.
To view the following window, click Management > RMON > RMON Global Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
RMON Rising Alarm Trap Select this option to enable or disable the RMON Rising Alarm
Trap Feature.
RMON Falling Alarm Trap Select this option to enable or disable the RMON Falling Alarm
Trap Feature.
Click the Apply button to accept the changes made.
RMON Statistics Settings
This window is used to configure and display the RMON statistics on the specified port.
To view the following window, click Management > RMON > RMON Statistics Settings, as shown
below:
The fields that can be configured are described below:
Parameter Description
Port
Select to choose the port.
Index
Enter the RMON table index. The value is from 1 to 65535
Owner
Enter the owner string. The string can be up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Show Detail button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 5-10 RMON Global Settings window
Figure 5-11 RMON Statistics Settings window