User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
39
Read View Name Enter the read view name that the group user can access.
Write View Name Enter the write view name that the group user can access.
Notify View Name Enter a write view name that the group user can access. The notify
view describes the object that can be reported its status via trap
packets to the group user.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
SNMP Engine ID Local Settings
The Engine ID is a unique identifier used for SNMP V3 implementations on the Switch.
To view the following window, click Management > SNMP > SNMP Engine ID Local Settings, as shown
below:
The fields that can be configured are described below:
Parameter Description
Engine ID
Enter the engine ID string with the maximum of 24 characters.
Click the Default button to revert the engine ID to the default.
Click the Apply button to accept the changes made.
SNMP User Table Settings
This window is used to configure and display the SNMP users that are currently configured on the Switch.
To view the following window, click Management > SNMP > SNMP User Table Settings, as shown
below:
Figure 5-7 SNMP Engine ID Local Settings window
Figure 5-8 SNMP User Table Settings window