User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
32
5. Management
User Account Settings
Password Encryption
SNMP
RMON
HTTP/HTTPS
D-Link Discovery Protocol
User Account Settings
This window is used to create and configure the user accounts. The active user account sessions can be
viewed. The pre-defined user account privilege levels supported by this switch is:
 Administrator - Privilege read-write. This administrator user account level can monitor all
system information and change any of the system configuration settings expressed in this
guide.
To view the following window, click Management > User Account Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
User Name
Choose the user account name here.
Privilege
Choose the privilege level of user.
Password
The password belongs to the user account. Up to 32 characters.
Click the Apply button to accept the changes made.
Click the Delete button to delete the selected user.
Figure 5-1 User Management Settings window