User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
28
Severity
Select the severity value of the type of information that will be
logged. Options to choose from are Errors, Warning, Notice and
Informational.
Facility
Select the facility value here. Options to choose from are 0 to 7.
Click the Apply button to accept the changes made.
System Log
This window is used to view and clear the system log.
To view the following window, click System > System Log > System Log, as shown below:
Click the Clear Log button to clear the system log entries displayed in the table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Time and SNTP
The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the
Internet. It provides comprehensive mechanisms to access national time and frequency dissemination
services, organize the SNTP subnet of servers and clients, and adjust the system clock in each
participant.
Clock Settings
This window is used to configure the time settings for the Switch.
To view the following window, click System > Time > Clock Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Time (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Date (DD / MM / YYYY)
Enter the current day, month, and year to update the system clock.
Click the Apply button to accept the changes made.
Figure 4-13 System Log window
Figure 4-14 Clock Settings window