User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
27
System Log
System Log Settings
This window is used to view and configure the system’s log settings.
To view the following window, click System > System Log > System Log Settings, as shown below:
The fields that can be configured for Global State are described below:
Parameter Description
System log
Select this option to enable or disable the global state.
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter Description
Buffer Log State
Select whether the enable or disable the buffer log’s global state.
Click the Apply button to accept the changes made.
System Log Server Settings
This window is used to view and configure system log’s server settings.
To view the following window, click System > System Log > System Log Server Settings, as shown
below:
The fields that can be configured are described below:
Parameter Description
Host IPv4 Address
Enter the system log server’s IPv4 address here.
UDP Port
Enter the system log server’s UDP port number here. This value
must be 514 or between 1024 and 65535. By default, this value is
514.
Figure 4-11 System Log Settings window
Figure 4-12 System Log Server Settings window