User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

Reset

This window is used to reset the Switch’s configuration to the factory default settings. To view the

following window, click Tools > Reset, as shown below:

Select the The Switch will be reset to its factory defaults including IP address, and then will save,

reboot option to reset the Switch’s configuration to its factory default settings.

Select the The Switch will be reset to its factory default except IP address, and then will save,

reboot option to reset the Switch’s configuration to its factory default settings. This option will exclude the

IP address from being changed.

Select the The Switch will be reset to its factory defaults including IP address option to reset the

Switch’s configuration to its factory default settings.

Click the Apply button to initiate the factory default reset and reboot the Switch.

Reboot System

This window is used to reboot the Switch and alternatively save the configuration before doing so. To

view the following window, click Tools > Reboot System, as shown below:

When rebooting the Switch, any configuration changes that was made during this session, will be lost

unless the Yes option is selected when asked to save the settings.

Click the Reboot button to alternatively save the settings and reboot the Switch.

Figure 3-15 Reset window

Figure 3-16 Reboot System window

Figure 3-17 Reboot System - Rebooting window