User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
15
Take effect after the next boot
(startup-config)
Specify this radio button to restore and overwrite the start-up
configuration file on the Switch.
Click the Restore button to initiate the configuration restore.
Configuration Backup to HTTP
This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to HTTP, as shown below:
The fields that can be configured are described below:
Parameter Description
Include Username Password
Specify this radio button to back up the running configuration file
include username password from the Switch.
Exclude Username Password
Specify this radio button to back up the running configuration file
exclude username password from the Switch.
Click the Backup button to initiate the configuration file backup.
Configuration Backup to TFTP
This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to TFTP, as shown below:
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server’s IPv4 address here.
Destination File
Enter the destination filename and path where the configuration
file should be stored on the TFTP server. This field can be up to 64
characters long.
Click the Backup button to initiate the configuration file backup.
Figure 3-9 Configuration Backup to HTTP window
Figure 3-10 Configuration Backup to TFTP window