User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
11
3. Save and Tools
Save Configuration
Firmware Information
Firmware Upgrade & Backup
Configuration Restore & Backup Log Backup
Ping
Reset
Reboot System
Save Configuration
This window is used to save the running configuration to the start-up configuration or the file system of
the Switch. This is to prevent the loss of configuration in the event of a power failure.
To view the following window, click Save > Save Configuration, as shown below:
Click the Apply button to save the configuration.
Firmware Information
This window is used to configure the firmware image boot up.
To view the following window, click Tools > Firmware Information, as shown below:
Click the Boot UP button of image 1 or image 2 for boot up.
Figure 3-1 Save Configuration window
Figure 3-2 Firmware Information window