User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
130
Tx/Rx CRC Counter
This field displays the TX/RX CRC counter.
Discovered Surveillance Devices
This field displays the number of ONVIF IP
cameras and NVRs discovered on the port.
Click the hyperlink (1) to view the group details
associated with IP camera or NVR
connected to
the port. For
more information, refer to Group
Details on page 360..
Detect Distance Click the Detect button to initiate a cable
distance test on the specified port.
Click the Detect All button to initiate a cable distance test on all the ports of the Switch.
Toolbar
Wizard
Click this option to start the Smart Wizard. For more information about the Smart Wizard, refer to Smart
Wizard on page 4.
Tools
Firmware Information
This window is used to configure the firmware image boot up.
To view the following window, click Tools > Firmware Information, as shown below:
Click the Boot UP button of image 1 or image 2 for boot up
Firmware Upgrade & Backup
Firmware Upgrade from HTTP
This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from
Figure 12-19 Firmware Information window
Figure 12-20 Firmware Upgrade from HTTP window