User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
127
The fields that can be configured in the Surveillance VLAN Settings section are described below:
Parameter Description
VLAN ID
Enter the ID of the surveillance VLAN here. The
range is from 2 to 4094.
Click the Apply button to accept the changes made.
The fields that can be configured in the IP Settings section are described below:
Parameter Description
Get IP From
Select the method used to configure the IP
address settings on the Switch here. Options to
choose from are:
Static - Specifies that the IP address settings
will be manually configured.
DHCP - Specifies that the IP address settings
will be automatically obtained from a DHCP
server on the network.
IP Address
Enter the IPv4 address of the Switch here.
Mask
Enter the IPv4 subnet mask of the Switch here.
Gateway
Enter the IPv4 address of the default gateway
here.
Click the Apply button to accept the changes made.
The fields that can be configured in the SNMP Host Settings section are described below:
Parameter Description
Host IPv4 Address
Enter the IPv4 address of the SNMP host here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
The fields that can be configured in the Log Server section are described below:
Parameter Description
Server IP
Enter the IPv4 address of the log server here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
The uplink ports join all surveillance VLANs since they forward surveillance traffic to other switches. It is
recommended to connect uplink ports to the other switches because the discovery process is disabled on
these ports.