User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
126
The fields that can be configured in the SNTP Global Settings section are described below:
Parameter Description
SNTP State
Select to enable or disable the SNTP feature
here.
Poll Interval
Enter the poll interval value here. The range is
from 30 to 99999 seconds. By default, this
value is 720 seconds.
Click the Apply button to accept the changes made.
The fields that can be configured in the SNTP Server Setting section are described below:
Parameter Description
IPv4 Address
Enter the IPv4 address of the SNTP server
here.
Click the Add button to add the SNTP server to the configuration.
Click the Delete button to remove the SNTP server from the configuration.
Surveillance Settings
This window is used to display and configure the surveillance settings. The Switch has only one
Surveillance VLAN. This surveillance VLAN also supports to recognize the surveillance devices, like IP
Cameras (IPC) and Network Video Recorders (NVR), using the ONVIF protocol.
To view the following window, click Surveillance Settings, as shown below:
Figure 12-16 Surveillance Settings window