User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
123
This displays the number of PoE devices
connected to the Switch that is using 15 Watts
of power per port.
This displays the number of PoE devices
connected to the Switch that is using 30 Watts
of power per port.
This displays the Ethernet port number on the
Switch.
This displays the PoE state on the port. This
can be either PoE ON or PoE OFF.
This displays the maximum PoE budget
available on this port.
This displays the current PoE status on the
port. This status can be one of the following: -,
Searching, Delivering, or Power Denied.
When the Power Denied message is
displayed, click on the link to redirect the
Health Diagnostic window for more
information.
This displays the PoE consumption and power
class of the PD connected to the port.
PoE Scheduling
This window is used to display and configure the PoE scheduling settings.
To view the following window, click PoE Scheduling, as shown below:
The fields that can be configured in the Time Range section are described below:
Figure 12-12 PoE Scheduling window