User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
6
Step 2 – System IP Information
In this window, the user can configure the IP address assignment method, the static IP address, Netmask
and Gateway address.
NOTE: The Switch will probe for surveillance devices every 30 seconds. If a surveillance device is not in
the same subnet as the switch, it will not be discovered automatically. Place the Switch management IP in
the same subnet as the surveillance devices for ONVIF cameras to be added to the Surveillance Mode
Web UI automatically.
The fields that can be configured are described below:
Parameter Description
Static
Select this option to manually configure and use IP address
settings on this switch.
DHCP
Select this option to obtain IP address settings from a DHCP
server.
IP Address
Enter the IP address of the Switch here.
Netmask
Select the Netmask option here.
Gateway
Enter the default gateway IP address here.
Tick the Ignore the wizard next time option to skip the Smart Wizard on the next login.
Click the Exit button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.
Click the Next button to accept the changes made and continue to the next step.
Figure 2-4 System IP Information window