User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
108
DDM TX Power Threshold Settings
This window is used to configure the threshold of TX power for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as show below:
The fields that can be configured are described below:
Parameter Description
Port
Select the port used for the configuration here.
Action
Select the action that will be taken here. Options to choose from
are Add and Delete.
Type
Select the type of TX power threshold. Options to choose from are
Low Alarm, Low Warning, High Alarm, and High Warning.
Power Unit
Select the power unit here. Options to choose from are mW and
dBm.
Value
Enter the threshold value. When selecting mW in the Power Unit
drop-down list, this value must be between 0 and 6.5535. When
selecting dBm in the Power Unit drop-down list, this value must be
between -40 and 8.1647.
Click the Apply button to accept the changes madeDDM RX Power Threshold Settings
DDM RX Power Threshold Settings
This window is used to configure the threshold of RX power for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as show below:
Figure 9-6 DDM TX Power Threshold Settings window
Figure 9-7 DDM RX Power Threshold Settings window