User Manual

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
106
DDM Temperature Threshold Settings
This window is used to configure the DDM Temperature Threshold Settings for specific ports on the
Switch.
To view the following window, click OAM > DDM > DDM Temperature Threshold Settings, as show
below:
The fields that can be configured are described below:
Parameter Description
Port
Select the port used for the configuration here.
Action
Select the action that will be taken here. Options to choose from
are
Add and Delete.
Type
Select the type of temperature threshold. Options to choose from
are Low Alarm, Low Warning, High Alarm, and High Warning.
Value
Enter the threshold value. This value must be between -128 and
127.996 °C.
Click the Apply button to accept the changes made.
DDM Voltage Threshold Settings
This window is used to configure the DDM Voltage Threshold Settings for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM Voltage Threshold Settings, as show below:
Figure 9-3 DDM Temperature Threshold Settings window
Figure 9-4 DDM Voltage Threshold Settings window