Section 3 Configuration Port Forwarding This will allow you to open a single port or a range of pins. Ham IF Address: TCP/UDP: Schedule: Ia hound Filter: Enter a name for the rule or select an application from the drop-down menu. Select an application and click =< to populate the fields, Enter the IP address of the computer on your local network that you want to allow the incoming device to.
Section 3 Configuration UDP, then enter the firewall (public) ports associated with thé rigger port to open then for inbound traffic: Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet {telephony: and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-825.
Section 3 Configuration QoS Engine The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the Qos Engine settings are disabled and application priority 1s not classified automatically. Enable Tragic This option is disabled by default.
Section 3 Configuration Enable 008 Engine: This option is disabled by default. Enable this option for better performance and experience with online gammas and other interactive applications, such as VoIP #automatic This option is enabled by default. This will allow your router to automatically determine the network priority of running Classification: programs. Dynamic This option should be enabled when you have a slow Internet up link.
Section 3 Configuration Network Filters Lie MAC (Media Access Control} Fillers io allow or deny LAN (Local Area Network computers by their MAC addresses from accessing the network, You car either mentally add a MAC address of select the MAC address from the list of clients that are currently connected to the Broadband Router Configure MAG Select Turn MAC Filleting Of, Allow MAC Filtering: addresses listed halo. or Deny MAC addresses listed below rom the drop-down menu.
Section 3 Configuration Access Control The Access Control section allows vou lo control access in and oul of var network, Use this feature as Parental Controls {fo only grant access to approved sites; limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Palsy: Click the Add Polly bison to start the Attests Control Wizard. wpe eas Access Control Wizard Click Next fo continue with the Wizard: Bn his wie vil ibe ia Gobbing Sok bie Brass Greet.
Section 3 Configuration Access Control Wizard (continued) Enter a name for the policy and then click Next to continue. I, AEN Bbc Select a schedule (LE. Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. = Address Type Select IP address, MAC address, or Other Machines.
Section 3 Configuration Access Control Wizard (continued) Enter the rule: Enable Check to enabler rue; Name Enter a name for your line, Est IP Start Enter the starting IP address. Est iP End Enter the ending 1F address. Protocol Select the operator Est Port Start Enter the starting port number Est Port End Enter the @ding portmanteau To enable web logging, click Enable: Click Save © save the access control rile: Your wanly created policy willfulness wg under Policy: Table.
Section 3 Configuration Website Filters Website Filters are used to @low you to set up 4 list of allowed Web sites that can be used by multiple users through the network. To use this feats select fo Await or Deny, enter the Somali or Website: and click Save Settings. You must also select Apply Web Filter under ihe Access Control section (page 41) fund Website Select Allow or Deny.
Section 3 Configuration Inbound Fillers The Inbound Filter option ig an advanced method of controlling tads received from he Internet, With this feature vou can configure inbound data filleting tiles that control data based anon IP address range. Inbound Fillers can be used with Virtual Server, Port Forwarding. or Emote Administration features: Name: Enter a name forth inbound filter rule. Action: Select Allow or Deny.
