Section 3 Configuration Firewall Settings A firewall protects your network from the outside world. The DIR-825 offers a firewall ype functionality, The SPI feature helps prevent cuber attacks. Sometimes you may want a centiliter exposed fo the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ.
Section 3 Configuration Routing The Routing option is an advanced method of.customizing specific routes of data through our network, Destination I Enter the IP caddies of passels mal Willie this route Metatarsi: Enter the cabinetmaker the routs: please note that the octets must match: your destination iP address, Gateway: Enter your next hop gateway to bie taken shift route is used. fo Hettie: The route metrics valuate fom fo 16 that a. a indicates the cost of using this route.
Section 3 Configuration Advanced Wireless Settings 802.11n/y (2.4GHz) Transmit Power, Set the transmit power of the termagants. Ld nets ae ae Beacon Parr Beacons are packets sent by an Access Intention Wireless Band © 2 AGH: Band synchronize a wireless network, Specify a value. Transit Power « 100 is the default setting and is recommended.
Section 3 Configuration Advanced Wireless Settings 802.11n/a (GHz) Transmit Power, Set the transmit power of the antennas. LL ral BL as oR Season Perls Beacons are packets sent by an Access Point to Wireless Band synchronize a wireless network. Spicily a value. Transmit Power; 100 is the default setting and is recommended.
Section 3 Configuration WISH Settings WISH is short for Wireless Intelligent Stream Handling, a'technology developed fo enhance your experience of using a wireless network by prioritizing the traffic of different applications. Enable WISH: Enable this optic: if vou Want to slow WISH 1 prize autocratic: HTTP: Allows the router fo recognize HTTP transfers | wo. [EISENSTEIN -.
Section 3 Configuration Hams: Create a name for the rule that is meaningful Hae Pan Brit 10 you. Interlocutory iw ne Prettily; The priority of the message flow is entered . Het | Root Rigs fa : 10 2552525528 iF TH 85805 here. The four priorities are defined as: Est GF Bane Host J Foi Rabin BK: Background (least urgent) nan bo 28h SE Ise en . to gas BE: Best Effort, Vi: Video WO: Voice (most urgent) Protozoa: The protocol used by the messages.
Section 3 Configuration WI-Fi Protected Setup (WPS) WI-Fi Protected Setup (WPS) System is a simplified method ar securing your wireless network during the “initial setup as well as the “Add New Device” processes. The WI-Fi Alliance (WFA) has certified it across different predicts as well as manufactures.
Section 3 Configuration Add Wireless This Wizard helps you add wireless devices to the wireless network. Station: The wizard will ether display the wireless network settings to guide you through manual configuration, prompt vou fo enter the PIN for the devise, or ask you to press the configuration button on the device.
Section 3 Configuration Advanced Network Settings Enable Upon: To use the Universal Plug and Play (UPnP™) feature click on Enabled. UPON provides compatibility with networking equipment, software and peripherals, WAN Ping: Heckling the box will not allow the DIR-BE to respond to pings. Blocking the Ping may provide some oxymora security from hackers. Check the box to allow the Internet port to be “pinged”.
Section 3 Configuration Guest Zone The Guest Zone feature will allow you to create temporary zones halt can be used by guests to access ihe internal, These zones will be separate from your main wireless network. You may configure different zones forth 2 GHz and 5.0GHz wireless bands. Enable Guest Zone Check to enable the Guest Zone feature. Schedule: The schedule of time when the Guest Zone will be active. The schedule may be ssl to Always, which will allow the particular service 0 always be enabled.
