User Manual

30D-Link DIR-601 User Manual
Section 3 - Configuration
Manual Wireless Network Setup
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Click Add New to create your
own time schedule to enable the wireless function.
Service Set Identifier (SSID) is the name of your
wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
Select one of the following:
802.11g Only - Select if all of your wireless clients
are 802.11g.
802.11n Only - Select only if all of your wireless
clients are 802.11n.
Mixed 802.11n and 802.11g - Select if you are using
a mix of 802.11n and 802.11g wireless clients.
The Auto Channel Scan setting can be selected to
allow the DIR-601 to choose the channel with the least
amount of interference.
Indicates the channel setting for the DIR-601. By
default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to
customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
40MHz - Select if you are using only 802.11n wireless clients.
Enable Wireless:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Channel Width: