User Manual Part 1

21D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Check the box to enable the wireless function. If you do not want to

use wireless, uncheck the box to disable all the wireless functions.

Service Set Identifier (SSID) is the name of your wireless

network. Create a name using up to 32 characters. The SSID is

case-sensitive.

Indicates the channel setting for the DIR-330. The Channel can be

changed to ﬁt the channel setting for an existing wireless network or

to customize the wireless network. If you enable Auto Channel Scan,

this option will be greyed out.

The Auto Channel Scan setting can be selected to allow the

DIR-330 to choose the channel with the least amount of interference.

This feature is enabled by default.

Select one of the following:

802.11b only - Select if all of your wireless clients are 802.11b.

802.11b/g mixed - Select if you are using both 802.11b and 802.11g wireless clients.

802.11g only - Select if all of your wireless clients are 802.11g.

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the router. If Invisible is selected

the SSID will not be seen by site survey utilities so your wireless clients must have the SSID manually entered to connect to

the router.

Refer to page 50 for more information regarding wireless security.

Enable Wireless:

Enable Auto

Channel Scan:

Wireless Settings

Wireless Network

Name:

Wireless Channel:

802.11 Mode:

Visibility Status:

Wireless Security: