User's Manual

Section 3 – Configuration
D-Link DIR-320 User Manual
35
Wi-Fi Protected Setup
Wi-Fi Protected Setup or WPS makes wireless security configuration
much quicker simpler for wireless stations that support this feature.
NOTE: The Generate New PIN button is for the Router’s own PIN. This is used when the
Router needs to connect to other WPS enabled access points.
To connect a new wireless station with WPS, click on the Add Wireless
Device with WPS button. A new menu appears.
There are two methods available to connect a WPS wireless station, a
manual PIN entry or automatic method.
To use the PIN entry method, type the new station’s PIN number in the
space provided and click on the Connect button. The router begins
searching the wireless network for the device. Now begin the WPS
connection procedure with the device attempting connection. The router
will search for 120 seconds. If it fails to find the device, a message
appears explaining that the WPS connection failed.
To use the automatic WPS method, click on the Virtual Push Button. The
router begins searching the wireless network for the device. Now begin
the WPS connection procedure with the device attempting connection.
The router will search for 120 seconds. If it fails to find the device, a
message appears explaining that the WPS connection failed.