User's Manual

Section 3 – Configuration

D-Link DIR-320 User Manual

Router IP Settings

Router Settings

This section is used to configure the internal network settings of the

Router. This IP address is private to your internal network and cannot be

seen on the Internet. The default Router IP Address is 192.168.0.1 and

the Default Subnet Mask is 255.255.255.0. The Local Domain Name is

for the local Domain set on your network, if you have given it a name

previously. This field is for your personal use and unnecessary for proper

configuration of this window.

In addition, the Router can be configured to relay DNS from your ISP or

another available service to workstations on your LAN. When Enable

DNS Relay is checked, the Router will accept DNS requests from hosts

on the LAN and forward them to the ISP (or alternative) DNS servers.

Alternatively, you may also disable the DNS relay and configure hosts on

your LAN to use DNS servers directly. Most clients using the Router for

DHCP service on the LAN and are using DNS servers on the ISP’s

network, will leave DNS relay enabled.